GPS ONE – Telemetry Tracking Module

SPECIFICATIONS

• 16MIPS RISC CPU for high-performance GPS system processing
  • Filtering and adaptive rate control for down-link messages to preserve RF Link bandwidth
• SDIO Micro-SD Memory Card support (J6) for  data logging onto FAT16/FAT32 media (up to T10 (25Mhz HDLC) V2.0 32GB Cards)
  • Support for logging full NMEA data, temperature, power, voltage and time
• High-performance uBlox LEA-5/6 GPS Receiver Module
  • uBlox u-Center USB support
• NMEA (WGS-84) output provides the widest range of interoperability with GPS software
• High power 1 Watt (1000mW) 30dbM 900Mhz FHSS Modem supporting 500Kbps datarate and up to 16 independent channels (TDMA Dynamic mode)
• Up to 12V, 2A input power support
  • Terminal Block for Power and optional switch
• External 3V GPS Almanac battery – for hot-start.
• Main Battery and GPS Battery voltage/current monitoring
• Temperature Sensing from -55°C to +125°C with 0.5°C Accuracy
• GPMTW NMEA active output or console stats
• Expansion port for future module upgrade
• Expert mode supports remote control wireless login shell with password protection featuring command line shell interface for advanced users
• Range: 100 miles LOS
• Supported software: any NMEA GPS Program (ExpertGPS, VisualGPS, Google Earth, etc)
• Over 8hrs operational time (running all features) using 9.6V 2200mah NiMh 8xAA battery pack

PCB DIMENSIONS

• 91.35 x 49.35mm x 12.7 (LxWxH mm)
• 3.59” x 1.94”  x 1/2″ (LxWxH inches)

Assembled height: ½” High (fits inside 54mm Performance Rocketry AF Tube)

Weights

• Board Weight:  1.53 oz (43.5g)
• GPS Almanac Battery Weight: 4.1g
• 0dB RPSMA Antenna: 25.5g
• SL1206R GPS Antenna: 18.7g
• Total flight weight: 91.8g (3.24 oz)

Note: accessories ordered separately or as a kit.

GPS-1/Basestation-2 Complete Package

Complete package includes:

• 9.6v 2200Mah in Square configuration, Deans Micro connector
• Battery connector, Deans Micro (Wire + Deans Micro pre-soldered)
• GPS-1 Telemetry Transmitter Board
• Basestation-2 Handheld Receiver
• GPS Antenna and SMA M-M Cable
• Modem Antenna and RPSMA M-F Cable
• 3V GPS Almanac Battery
• 6-9V Smartcharger
• Battery Charger Plug (Basestation-2)
• Battery Charger Plug (Deans Micro)
• Factory Paired Receiver/Transmitter
• Mounting Hardware

GPS-1/Basestation-2 Complete Package

GPS-1/Modem Starter Package

Starter package includes:

• DNT900 Factory Modem (and Accesories – includes RPSMA 2dB Rubber Duck Antenna, Power-supply and Cables)
• GPS-1 Telemetry Transmitter Board
• GPS Antenna and SMA M-M Cable
• Modem Antenna and RPSMA M-F Cable
• 3V GPS Almanac Battery
• Factory Paired Receiver/Transmitter
• Mounting Hardware

NOTE: starter package does not include batteries.

GPS-1/Modem Starter Package

GPS-1 Bare Board

Bare Board package includes:

• GPS-1 Telemetry Transmitter Board
• Factory Paired Receiver/Transmitter

NOTE: bare board does not include batteries or antennas.

GPS-1 Bare Board

Options

Key Base to existing Transmitter $100.00 USDKey Transmitter to existing Base $100.00 USDClone Transmitter $100.00 USDClone Basestation $100.00 USDTest Base/Remote $100.00 USDPostmortem Analysis (SD Data Analysis) $50.00 USD

Custom Options

See the Basestation-1 and the Basestation-2 for details on the Telemetry receiver.

Copyright (C) 2013-2014 Real Flight Systems, Inc.